Resume of JOEL JACINTO

Structural Design Engineer / Designer /Checker

More than sixteen years of work experience in engineering, procurement and construction. Have an extensive work experience in consultancy engineering and EPC of oil and gas offshore and onshore greenfield and brownfield projects such as jackets, modular topsides, outfitting piperacks and stairtowers, FPSO conversions, redevelopment of offshore platform, crude oil terminals and  refineries structural facilities. Talented & skillful in conceptual design, shop drawing production, detailing of bolted and welded connections, checking, as-builting, cutting plans, lifting/loadout procedure and analysis, MTO and estimates, weight control monitoring, formulating and answering site technical queries and management of engineering deliverables. Computer software skills in STAADPro, PDMS Design & Draft, TEKLA, 2D/3D AutoCAD, Naviswork, Revu PDF, Acrobat and MS Office. Efficiency with high quality output is one of my primary work objectives. A registered license civil engineer in the Philippines since December 2000.

Last Resume Update November 15, 2017
Address San Pascual, Philippines
E-mail jcjacinto0411@yahoo.com.ph
Phone Number +63 921 894 2343
Website https://www.linkedin.com/in/joel-jacinto-71a20313b/

Experience

SNC Engineering Philippines
BIM Manager / Lead
Jun 2017 - Current
- Lead and initiate the review of drawing package received prior to work execution.
- Lead the review and formulation of all sited technical queries found in the drawing package received.
- Estimate the manhour and provide the schedule for all deliverables.
- Distribution of work assignment on each team members.
- Supervise and monitoring of work progress.
- Coordinate with the client for shop questions and other technical queries.
- Execute final check for all drawing output before submission.
SNC Engineering Philippines
Senior Structural Designer / Checker -Tekla
Nov 2015 - Jun 2017
- Receive and analyze job package and other additional documents specifications prior to work implementation.
- Execute drawing analysis & interpretation and prepares necessary revisions caused by drawing implications.
- Checks 3D Model layout using Tekla Structures Computer Software.
- Studies and check detail drawings & other pertinent papers for the preparation of fabrication/erection drawings completeness and quality in accordance with the AISC standard and standard design package.
- Formulate RFI’s and Inquiries for the conflict and incomplete design information in design drawings.
- Check material take-off, material requisition, bolts included in detailed drafting.
- Provide instructions to modeler and editor to perform work package.
Aker Solutions Malaysia
Area Lead/Senior PDMS Structural Designer / Checker
Jul 2014 - May 2015
- Adopt Statoil standards, Norsok standards, PSA requirement and project requirements and ensure that these are followed
- Liaise with multidisciplinary team like Piping, Mechanical, Instrumentation, Electrical, Structural, Telecom, Safety etc to ensure deliverables related to the Structural PDMS model etc under area engineering are delivered as per schedule
- Secure correctness and accuracy of the PDMS model in accordance with PDMS Guidelines
- Ensure that the PDMS model are a true reflection of design conducted by Engineers and own the responsibility of PDMS model integrity
- Perform data consistency check, 3D model check and together with the drawing deliver a clash report proving a clash free design and a complete checklist with a proper self-check performed to the Lead Designer
- Interacting with Engineer and implement correct: dimensions, material qualities, profiles and sections, welds incl. weld type and inspection categories, member connections etc.
- In due time report to Lead Designer delays or bottlenecks that prevents delivery of own work in accordance with project need dates without undue delay.
- Implement approved Changes and release of Holds in accordance with instructions.
- Seek for resolution of design conflicts and ambiguousness both internally and towards Company requirements.
- Check of accordance with drawing templates.
- Check that drawing is in accordance with 3D model.
- Check that all relevant procedures, work instructions and guidelines have been followed.
- Performance of assigned discipline activities and deliveries
- Ensure that work, within assigned discipline activities, is performed:
- in accordance with project execution model
- in accordance with the discipline schedule
- Within discipline budgets.
- With focus on Quality and HSE aspects.
- In accordance with established design basis.
MMC Oil and Gas Engineering Sdn. Bhd.-Malaysia
Lead/Senior Structural Designer
Jan 2012 - Dec 2013
-Conduct offshore and onshore survey, investigations and inspections for the proposed modification and additional facilities of particular project.
-Assist the Lead Engineer for the preparation of design package and all engineering deliverables such as design analysis package and technical report.
-Provide designs and necessary calculations and modeling in full compliance to client’s requirements, specifications, relevant codes and standards.
-Prepare Material Take –Off & WCR.
-Provide guidance and instructions to draftsman in preparing design drawings.
-Review and checks the design drawings for the completeness and correctness of the input data.
Prepare As-Built Drawings.
Malaysia Marine & Heavy Engineering Sdn. Bhd. - Johore City
Senior Structural Design Engineer
Nov 2007 - Dec 2011
-Provide estimate on number of drawings to be produced, monitor and control all drawings as assigned for planning package of all design activities required for a particular project.
-Perform design work in full compliance to client’s requirements, specifications, relevant codes and statutory requirements.
-Review AFC documents(design drawings, specifications and vendor’s data, raised site technical queries, purchase requisitions(PR), material take off, ship loose list, initiate production of workshop drawings.
-Gathers inter-discipline periodic data for the preparation and monitoring of weight control reports (WCR) against client’s design calculated WCR.
-Provide guidance and instruction to draughts persons to produce workshop drawings, bill of materials and center of gravity and check the same for correctness, and clash free prior to submission for approval.
-Prepares Material Take Off and ensures its correctness and completeness. -As well as fabrication sequence and other bidding documents submitted by vendors prior to PR.
-Incorporate approved design changes in relevant drawings, bill of materials and CG, and formally recheck all affected shop drawings and provide change orders.
-Performs design calculations, analysis and lifting procedures required by the client.
-Assist Project Management Team on all design matters. Highlight design changes and Advise fabrication impact such as putting work “on hold”.
-Prepares and Check all As Built Drawings.
-Carry out all task as stated in QGP/Design Manual including any changes thereof from time to time.
Atlantic Gulf & Pacific Co. of Manila - Philippines
Senior Structural Detailer
Nov 2006 - Nov 2007
-Receive and analyze job package and additional documents specifications prior to work implementation.
-Prepares layout drawings in accordance with the standard drafting using AutoCAD Computer Software as required in Standard Design package.
-Studies and check detail drawings & other pertinent papers for the preparation of fabrication/erection drawings.
-Check material take-off, material requisition, bolts included in detailed drafting.
-Execute drawing analysis & interpretation and prepares necessary revisions caused by drawing implications.
Provincial Engineers Office - Batangas, Philippines
Engineer I (QS/CAD)
May 2006 - Nov 2006
-Evaluate and conduct site analysis for the proposed projects.
-Prepare structural detail drawings, design calculations, specifications and estimate for the proposed projects of the provincial government.
-Prepare bill of materials and work program as per schedule.
-Conduct site inspection and monitoring during construction stage.
-Evaluate contractor’s work progress and give instructions as necessary for the completion of the projects on time and inspect all their installation and construction works as per specification of the provincial government.
Municipal Engineers Office - San Pascual, Batangas, Phils.
Engineering Aide (QS/CAD)
Mar 2001 - May 2006
-Evaluate and conduct site analysis for the proposed projects.
-Prepare structural detail drawings, calculations, specifications and estimate for the proposed projects of the municipal government.
-Prepare bill of materials and work program as per schedule.
-Conduct site inspection and monitoring during construction stage.
-Evaluate contractor’s work progress and give instructions as necessary for the completion of the projects on time and inspect all their installation and construction works as per specification of the provincial government.
and field inspection of all industrial projects of private companies within the municipalities and prepare report and recommendation for public safety & standards as per building code requirements.

Education

University of Batangas
Bachelor of Science in Civil Engineering
Jun 1994 - Mar 2000
Major subjects in civil and structural engineering

Contact Candidate