| |
|
| Ref # |  | JS71225 |
| Year of birth | | 1957 |
Current Location/Address |
| City or Town | | Ploiesti |
| Country | | ROMANIA |
Permanent/Home Location/Address |
| City or Town | | Ploiesti |
| Country | | ROMANIA |
Languages |
| Primary Language | | Fluency |
| English | | Read, write and speak fluently |
Nationalities |
| Nationality | | ROMANIA |
| | |
Experience Classification |
| Job Function | | Years Experience |
| Instrumentation Engineer | | 14 |
| Instructor/Trainer | | 3 |
| Aeronautical Engineer | | 9 |
| | |
| | |
| Industry | | Years Experience |
| Oil and Gas | | 17 |
| Aerospace and Aviation | | 9 |
| | |
| | |
| | |
Qualifications |
| Highest Qualifications | | Degree |
| Qualification | Subject | Establishment/Country | Year |
| Degree | Aircraft Engineer | Aircraft Faculty, Bucharest, Romania | 1982 |
Other Qualifications, Memberships, Certification
October 2003 IPROLAM Institute - SIEMENS Authorized Training Center, Bucharest, Romania
ST-S7 SYH: Installation, Configuration and Start-up of SIMATIC S7 PLC family,
Project development with STEP7 software.
ST-S7 STOE: Maintenance, Troubleshooting, Communication via MPI using
STEP 7 software
May 2002 IPROLAM Institute - SIEMENS Authorized Training Center, Bucharest, Romania
ST-S5 SYS1: Programming, Testing and Troubleshooting of SIMATIC-S5 PLC
with STEP5 software
March 2001 INCAS Ltd., Constanta, Romania - USA OMNI Flow Computers Representative
Installation, Configuration, Programming and Start-up of OMNI Flow Computers
January 1999 County Training Center, Ploiesti, Romania (MS Authorized Training Center)
Installation and Configuration of the Windows NT Server
June 1996 SIVECO FRANCE, Puteaux - Paris, France
Implementation and Using the COSMAN Computer Maintenance Management
System Package
March 1995 Saab Tank Control, Gotebörg, Sweden
Service Engineer for Saab Tank Radar L/2 Systems |
Computer Skills and Software Used |
> Programming:
- STEP7 software for Siemens SIMATIC S7 PLC;
- ELOP II software for HIMA PLC
- 907 PC331 software for ABB PROCONTIC 07 KT 92 PLC.
> Operating Systems:
- Windows9x, Windows NT, Windows XP.
- OS2.3 Warp; Novell 4.11.
> Others: AutoCAD and Auto Lisp, Electronics Workbench;
> Communication
- Protocols: IPX/SPX, TCP/IP, DHCP, NetBEUI, Modbus;
- Interfaces: RS232C, RS422, RS485, TTY, I2C. |
Work Locations |
| Are you willing to move or relocate? | |
Yes - I will travel domestically
Yes - I will travel internationally | |
Availability |
| Earliest Start Date | | Given 4 weeks notice |
Ideal Next Job |
| My desired position is Instrument Engineer/Supervisor in Oil&Gas industry (construction, commissioning, start-up, maintenance). |
Required Salary & Conditions |
| Minimum Salary EURO 80,000.00 per year plus paid travel and accomodation. |
Employment History |
| Total Years of Work Experience: | | 30 |
| Commenced Full Time Work: | | 1982 |
| Job Title: | | Senior Project Manager |
| Duration | | From : 2011 To: 2012 |
Summary |
2011 – date OMV PETROM, Bucharest, Romania
2011 – date Senior Project Manager
2006 - 2011 SONATRACH - BHP Billiton Petroleum, OHANET NGL Plant, Algeria
2008 - 2011 Head of Department Projects and New Works
2006 - 2007 Instrument and Control Systems OJT
2004 - 2006 TECNIMONT Italy, WAFA Coastal NGL Plant, Libya
2004 - 2006 Instrument Specialist
2001 - 2003 Agip Oil, Abu-Attifel NGL Plant, Libya
2001 - 2003 Instrument & PLC Specialist
1994 - 2001 SNP-PETROM , PETROTRANS branch, Romania
1994 - 2001 Metering & Instrument Engineer
2001 - 2001 Head of Technical Department
1997 - 1997 PALBEN Cerkeskoy, Turkey
1997 - 1997 Instrument & Control Systems Engineer
1991 - 1993 Programmer, Ploiesti, Romania
1982 - 1991 Aircraft Design Engineer, Ploiesti, Romania |
Work Experience |
Work Experience
2011 – date OMV PETROM, Bucharest, Romania
2011 – date Senior Project Manager
• Accountable to the Maintenance Manager for management support and leadership of projects engineering and execution of Maintenance & Operations Projects
• Technical and field support for the maintenance of I&C Systems, as required
• Identify modifications to installed facilities to correct deficiencies and improve availability and reliability
• Support project/commissioning and start up activities belonging to I&C Systems
• Prepare training modules specific to I&C Systems for developing the competence of maintenance personnel
• Support the I&C planning team to review, prepare and populate a SAP PM program with appropriate I&C systems maintenance routines
• Provide technical input to project engineering team to identify and include the maintenance requirements into the deliverables of new project
2006 – 2011 SONATRACH - BHPBILLITON, OHANET LNG PLANT - ALGERIA
2008 – 2011 Head of Department Projects and New Works
• Main focus of the role to lead a multi-disciplinary engineering team tasked with the delivery of key projects throughout all stages
• Responsible for overseeing all modifications and change requests in line with organisation and industry requirements
• Accountable for the production and submission of a range of associated documentation such as studies, scope of works and engineering work-packages
• Providing leadership and direction for teams of contractors managing the completion of all activities in line with project plans and HSE policies
• Carrying out extensive liaison with contractors prior to project launch outlining expectations and timelines
2006 – 2007 Instrument and Control Systems OJT
• Responsible for the design, development and delivery of comprehensive training programmes for instrument technicians and engineers covering a range of areas including:
• Basic knowledge: Flow-sheet Symbols, P&IDs, Functional Diagrams, Cause&Effect, Redundant and Voting Systems, Alarm and Trip Systems, Instrument Terminology and Performance
• Safety Systems: Electric & Intrinsic Safety, Fire&Gas System, Fire Fighthing System, ESD philosophy
• Field Instrumentation: Pressure, Temperature, Level and Flow Measurement, Actuators and Control, Linear and Angular Position Detectors, Proximity Sensors, Limit Switches, Force and Torque Transducers, Vibration and Schock Sensors
• Signal Conditioning and Transmission
• Analytical Instrumentation: Conductivity, pH, Chlorine, Moisture in Air/N2, Moisture in gases, O2 in gases, CO2 in gases, H2S in gases, Chromatography
• DANIEL Gas and LPG Fiscal Metering Systems
• Programmable Electronic Systems:
- Siemens SIMATIC S7-400 PLC - part of control system of MAN Turbo THM1304 turbo-compressor
- HIMA 41q PLC used as Safety Integrity System of the same turbo-compressor
• Instrumentation of Nuovo Pignone MS5002C GT and 2BCL506 Compressor
• Bently Nevada 3500 Vibration Monitoring System
• Compressor Control System: Series 3 Plus - Performance and Anti-surge Controllers
• I&C System of Caterpillar 3500 Emergency Diesel Generator
2004 – 2006 TECNIMONT ITALY, WAFA NGL PLANT - LYBIA
2005 – 2006 Instrument Specialist
• Responsible for the completion of a wide range of maintenance and troubleshooting activity in additional to providing training to instrument technicians, across the following areas:
• MS 5001 Nuovo Pignone Gas Turbines
• Siemens PG302 (edition II) and Daniel 571/2350, 591/2350, 1000/2350 Process Gas Chromatographs
• PANAMETRICS and AMETEK moisture analyzers
• ATAC RVP analyzer
• Polymetron MONEC 8965 and YOKOGAWA P-202S pH transmitters
• Polymetron MONEC 9182 dissolved O2 in the boiler feed water analyzers
• YOKOGAWA SC202G(S) and Polymetron MONEC 8964 conductivity transmitters
• ENDRESS+HAUSER: Liquisys MCLM 253 conductivity transmitter, Liquisys MCCM 253 chlorine transmitter
• ABB Advance Optima Multi-FID 14 hydrocarbons in O2-N2-Air analyzers
• ABB model 4685 and SYSTECH ZR-893 Oxygen analyzers
• BRAN + LUEBBE Oleotrol 2 UVpcx&pcx oil traces in water analyzer
• Alphamoisture dewSmart DS100 dew point analyzers
• IONICS model 1800 Total Carbon Analyzers
• ENRAF 973 SmartRadar LT and 854 ATG Level Gauges
• Fire & Gas and Fire Fighting Systems
• Siemens S7-300 PLCs used to control: C3/C4 Loading arms respectively OSMOSA desalination plant
• HIMA H41q PLC – used as F&G Control System
2004 – 2004 Instrument Specialist
• Accountable for the proficient installation, commissioning and start-up of a range of systems including
• Fire and Gas Detection and Alarm System based on:
- ICS TRIPLEX PLC
- Flammable Gas Detectors: GENERAL MONITORS IR2100, Siemens CERBERUS DP60
- Flame detectors: GENERAL MONITORS FL3100 model
- Toxic Gas Detectors: GENERAL MONITORS S4100T model
- ALARMLINE DIGITAL Linear Heat Detection System: Kidde Fire Protection model
- Smoke detectors: SYSTEM SENSOR EUROPE: photoelectric, ionization, intrinsically safe models
- Heat detectors: SYSTEM SENSOR EUROPE 5451E model
- Manual Call Points: MENVIER CSA 1469 model, KROMAMAEC EFDC model
- Audio&Visual Alarms for: Fire, Flammable Gas and Toxic Gas
• Fire Fighting System based on:
- Water Spray Systems, Foam Water Spray Systems, Low Expansion Foam Systems, Water Curtain
Systems, Automatic Sprinkler Systems, based on VICTAULIC and VIKING equipments/instruments
- Inergen Clean Agent Systems based on ANSUL equipments
• Fire Alarm Control Panel, Master Fire Control Panel, Fire Fighting Control Panel
• Leading the check-up activity of loops and interlocking systems
• Hardware and software modifications of HIMA H41q PLC used as a F&G Control System
• Developing of Loops Drawings and Wiring Tables related to Fire and Gas and Fire Fighting Systems
2001 – 2003 AGIP Oil Co. NGL Plant, Abu-Attifel, LYBIA
2001 – 2003 Instrument Specialist
• Responsible for the completion of maintenance and troubleshooting activity of:
- Siemens SIMATIC S5-155H/CPU948R PLC, designated for shutdown and interlocking the plant
- ABB Master Piece 280/1 and Master View 850/1 DCS designated to control the plant
- GENESYS DCS & Siemens SIMATIC S5-115H/CPU924 PLC, designated to control the Oil Center
- CIMPLICITY 4.0 & GE Fanuc 90-30 Series /CPU 314 PLC designated to control the WRU
- ROCHEM units controlled by the SIMATIC S7-300/CPU314 PLC
- Siemens PG302 gas chromatographs
• Repairing, testing and calibration of instruments such as:
- ABB Kent Taylor, Hartman and Braunn, Fisher-Rosemount: TT, PT, FT, LT
- Ettore Cella, Robert Shaw, Officine Orobiche, BETA: pressure, temperature and vibration switches
- Masoneilan: pneumatic controllers-12000 model, level transmitters-12120 model, pneumatic regulators-559 model, PARCOL control valves and diaphragms regulators
- Meriam Instruments: pneumatic flow and pressure indicators
- Fisher: pneumatic controllers 4195 KA/KB/KC/CE series, level troll controller 2502 model;
- Kent Taylor P4000 electronic controller, Badge Meter FT
- Fisher, Parcol and Nuovo Pignone Safety and Relief Valves
- IRIS solid state flame detectors
• Installation, Configuration and Calibration of the followings analyzers:
- Endress+Hauser: Liquisys M-CPM 223 pH analyzer, Hygrolog WMY 770Z humidity analyzer
- Servomex 1175B oxygen analyzer, Houston Atlas 722R H2S Analyzer
- Sabroe Ultratronic 983K dew point analyzer
• Troubleshooting and scheduled maintenance of Fire & Gas Detection and Fighting System in the following configuration: ICS TRIPLEX control system, smoke detectors (ionization and optical models), gas detectors (catalytic and UV models), electrochemical H2S detectors, heat detectors
• Maintenance and Troubleshooting of control systems and instruments of:
- Tornado European Gas Turbine focused on: I/Os modules of RUSTRONIC PLC, 3300 Bently Nevada Vibration Monitoring System, HOW Fire Detect System, Lube Oil System, Fuel Gas System, etc.
- Nuovo Pignone centrifugal and reciprocating compressors, Atlas Copco Stationery Air compressors
1994 – 2001 SNP–PETROM, PETROTRANS - ROMANIA
2001 – 2001 Head of Technical Department
1994 – 2001 Metering and Instrument Engineer
• Installation, commissioning, startup and service of the Tank Radar L/2 systems:
- Radar Tank Gauge 2940&2930, Data Acquisition Unit 2100&2130, Field Connection Unit 2160
- Nulectrohms multiple Pt100 spot sensor, Fisher-Rosemount 3051L PT, Labko WBS300 WBS
- OS/2 Warp operating system, OPI 3C.0 Operator Interface
• Maintenance, Troubleshooting, Calibration and Programming of the gas oil and gasoline Metering systems, in the following configuration:
- OVAL PD volume flow meter (model LB/LC 29, 31, 32, 33, 60, 65)
- Elite Fisher Rosemont density transducer (CMF 025 sensor, RFT 9739 transmitter, NFC computer)
- Rosemount TT, Fuji PT
- OMNI 3000 flow computer
• Service and troubleshooting of ABB PROCONTIC 07 KT 92 PLC [907 PC331 software]
• Management of Maintenance activity using COSMAN (upgraded to COSWIN) CMMS
• Developing with AutoCAD14 & Auto Lisp an application to survey the maintenance of pipe lines
1997 – 1997 Computer and Instrument Engineer, Palben - Turkey
1991 – 1993 Programmer, Ploiesti - Romania
1982 – 1991 Aircraft Designer Engineer, Ploiesti - Romania
Education and Qualifications
Degree: Aircraft engineer – Romania (1977 - 1982)
Degree: Mathematics and Informatics Faculty, First Year Only – Romania (1991)
High School: I. L. Caragiale” High - School, Ploiesti, Romania (1972 - 1976)
Professional Training
2010 Field Response Team Leader (2010)
2008 British Safety Council, Level 1 (2008)
2003 IPROLAM Institute - SIEMENS Authorized Training Center, Bucharest, RO
ST-S7 SYH: Installation, Configuration, Start-up of SIMATIC S7 PLC, STEP7
ST-S7 STOE: Maintenance, Troubleshooting, Communication via MPI using STEP7
2002 IPROLAM Institute - SIEMENS Authorized Training Center, Bucharest, RO
ST-S5 SYS1: Programming, Testing and Troubleshooting of SIMATIC-S5 PLC using STEP 5
2001 INCAS Ltd., Constanta, Romania - USA OMNI Flow Computers Representative
Installation, Configuration, Programming and Start-up of OMNI Flow Computers
1999 County Training Center, Ploiesti, Romania (MS Authorized Training Center)
Installation and Configuration of the Windows NT Server
1996 SIVECO FRANCE, Puteaux - Paris, France
Implementation and using the COSMAN CMMS software
1995 Saab Tank Control, Gotebörg, Sweden
Service Engineer for Saab Tank Radar L/2 Systems
1987 Ploiesti Aerospace Research Institute, Romania
Operating on the VAX 11/730 super-mini computer under VMS OS
Further Skills
IT Proficiency: Programming: STEP 7 for Siemens SIMATIC S7 PLC, ELOP II for HIMA PLC
Operating Systems: Windows NT, Windows XP, OS2.3 Warp and Novell 4.11.
Others: AutoCAD, AutoLisp, Electronics Workbench
Communication Protocols: IPX/SPX, TCP/IP, DHCP, NetBEUI and Modbus
Interfaces: RS232C, RS422, RS485
Languages: Fluent English and French
|
Comments/ Hobbies/ Interests etc: |
Personal Details
Health: Good, Non-smoker
Other: Driver; full clean licence
Interests and Activities
Currently include: Tennis, Mathematics and IT
|
| | |
| | |
| | |
Last Updated on 13-Mar-12
-- End of CV/Resume --
Full CV/Resume available to paid companies/recruiters as an attachment
|