| |
|
| Ref # |  | JS14905 |
| Year of birth | | 1957 |
Current Location/Address |
| City or Town | | Singapore |
| Country | | SINGAPORE |
Permanent/Home Location/Address |
| City or Town | | Singapore |
| Country | | SINGAPORE |
Languages |
| Primary Language | | Fluency |
| Russian | | Read, write and speak fluently |
Nationalities |
| Nationality | | SINGAPORE |
| | |
Experience Classification |
| Job Function | | Years Experience |
| Naval Architecture | | 19 |
| Engineering Manager | | 1 |
| Barge Engineer | | 8 |
| FPSO/FPU | | 6 |
| Project Management/Coordination | | 4 |
| Industry | | Years Experience |
| Oil and Gas | | 19 |
| Engineering | | 12 |
| Shipbuilding | | 8 |
| Consulting Engineer | | 4 |
| | |
Qualifications |
| Highest Qualifications | | Degree |
| Qualification | Subject | Establishment/Country | Year |
| Masters or Higher | Post-graduate Course | Azerbaijan Polytechnic University, Azerbaijan | 1992 |
| Degree | Naval Architect | Odessa Marine Engineering Institute, USSR | 1979 |
Other Qualifications, Memberships, Certification
1. Fellow Member of Institute of Marine Engineering, Science and Technology (UK) from 2010. (FIMarEST, Membership No.801586).
2. Fellow Member of Royal Institution of Naval Architects (UK) from 2010. (FRINA, Membership No.219939).
3. Corporate Member of Royal Institution of Naval Architects (UK) from 1999. (MRINA, Membership No.219939).
4. Chartered Engineer with the UK Engineering Council from 1999. (CEng, Registrant No.514598).
5. National University of Singapore, Course on “Safety Management of Ships and Offshore Installations”, July 2010
6. Det Norske Veritas, Course on “Fatigue design of offshore structures and ships”, July 2009.
7. National University of Singapore, Course on “Floating Offshore Structures”, December 2004
8. Training course “Software for Naval calculations» in “Kvaerner” Headquarters (Oslo, Norway), from August to October 1997,
9. Certificate of postgraduate education, Azerbaijan Polytechnic University, Postgraduate courses “Fatigue crack resistance of metals” from 1989 to 1992.
10. Diploma of Naval Architect (equivalent of Bachelor Degree), Odessa Marine Engineering Institute, Shipbuilding & Ship-repair (Naval Architecture) courses from 1974 to 1979.
|
Computer Skills and Software Used |
| “MS Office”,“Seasafe”,”AutoCAD”, ”MOSES”,HECSDS, Nauticus, familiarity with “FastShip”, “GHS”, “Autoship/AutoHydro”, “Maxsurf/Hydromax”, “MathCAD”. |
Work Locations |
| Are you willing to move or relocate? | Countries NOT Willing To Work In! |
Yes - I will travel internationally
Yes - I will relocate internationally | AFGHANISTAN
IRAQ
NIGERIA
|
Availability |
| Earliest Start Date | | Given 4 weeks notice |
Ideal Next Job |
| Naval Architect/ Engineering management/ Engineering supervision of project/ FPSO conversion/ Design and construction of Semi submersible MODU, fixed platforms, FPSO, Drillships / Project and interface engineering/ Classification/ Weight & Dimension Control/ Stability Calculations/ Inclination Test/ heavy transportation |
Required Salary & Conditions |
| Negotiable. |
Employment History |
| Total Years of Work Experience: | | 33 |
| Commenced Full Time Work: | | 1979 |
| Job Title: | | Chief Naval Architect |
| Duration | | From : 2007 To: 2010 |
Summary |
PROSAFE Production Pte Ltd (Singapore)
September 2006 till Feb2010
Lead Naval Architect
Responsible for all Naval Architectural activities associated with design for conversion of FDPSO, with hull’s inspection, repair and renewal.
Denlane Shipbuilding Pte Ltd
March 2006 till August 2006
Technical manager
Development of plans and organisation of repair, restoration and modernisation of shipyard facilities and equipment
Development of forms and procedures for various shipyard activities, improvement of technological processes and implementation of new technologies.
Organisation and technical support of shipyards’ activities.
Technip Geoproduction (Malaysia)
October 2005 till now
Naval Architect
Stability Calculation for Juck-up Platform.
Design Criteria and Specifications
GlobalSantaFe Corporation, Development Driller 1 & 2 Construction Team (Singapore)
November 2001 till now.
Project Naval Architect
Responsible to the Project Manager for all Naval Architectural and Weight Control activities associated with the New Build Semisubmersible Mobil Offshore Drilling Rigs “Development Driller 1” and “Development Driller 2”(~$550M). These activities included:
• Design review, detail drawing and procedures review and approval, onsite reviews, raising and answering Technical queries,
• Review and approve Contractors engineering, procedures and drawings to ensure compliance with technical specification and regulatory requirements. Assist the Builder in interpretation and understanding of Owner requirements.
• Review and monitor the rig Construction Specification to ensure compliance with all current regulatory requirements with regards to Naval Architectural tasks. Identify and quantify significant variations and report findings to Project Management to decide course of action. Ensure Builder is aware of his obligations in regards to regulations in effect at contract signing and is acting on all such requirements. Ensure Project Management is aware of any proposed or forthcoming changes in regulatory requirements.
• Develop the Weight Control Procedure and Hull Dimension Control Procedure, organise and monitor the Weight and Dimension Control of hulls, columns and equipment during construction in accordance with international standards.
• Review and approve Builder’s “as-built” drawings, Stability Booklet, Operations Manual for completeness and accuracy, site verification of “as-built” drawings.
• Assist in the performance of construction site inspections as and when required.
• Interface with classification society surveyors, ABS.
• Develop the Inclination Test Procedure, monitor and approve of Inclination Experiments, review and approve Test Reports.
Caspian Drilling Company ltd. (Santa Fe Joint Venture in Azerbaijan)
May 1999 till November 2001.
Naval Architect
• Completed Stability Analysis and Report for Semisubmersible Mobil Offshore Drilling Unit (MODU) “Dada Gorgud” 3 upgrade (~$35M) for ABS Class approval.
• Developed procedure and supervised Inclination Test for MODU “DADA GORGUD” after 3 upgrade.
• Weight Control Supervisor during 3 upgrading of MODU “Dada Gorgud”.
• Developed the Operational manual for MODU “DADA GORGUD”.
• Completed Stability Analysis and Report for MODU “Istiglal” for DNV Class approval.
• Developed the Operational manual for MODU “Istiglal”.
British Petroleum /Shah Deniz/ Exploration Ltd. (BP Branch in Azerbaijan)
October 1997 till February 1999
Marine Engineer
• Set up of Weight Control Engineering Group on “Istiglal” (former “Shelf-5”) Semisubmersible Drilling Unit Upgrade Project (~$250M). Developed procedures and organisation of weight control services. Improved Excel as Weight Control Program.
• Supervised of Weight Control Group (3 pers.) and Naval Calculation Group (2 pers.).
• Working with DNV for “Istiglal” Class approval.
• Developed procedure and supervised Inclination Test for MODU “Istiglal” (former “Shelf-5”).
• Calculated stability-input data (Cross Curves, Tank Soundings, Line Drawing, etc.) for Upgraded Shelf-5.
• (in Oslo, Norway) Took part in stability calculations for Barge “Arendal” for transit with Power Generator Module on deck; took part in Design Stability Calculation for “Shelf-5” refurbishment.
Macshelf Azerbaijan Marine Construction Inc. (McDermott Joint Venture in Azerbaijan)
May 1996 to August 1997
Naval Architect
• Participated as part of a Naval Architectural Team, the Stability Control of different barges during marine operations.
• Designed of Load-out Procedure of 120m “Chirag-1” Drilling Platform Jacket for “STB-1” launch barge.
• Designed Load-out & Off-load Ballasting procedure of Superstructure modules of “Chirag-1” on the various barges.
• Completed Naval Architectural Calculations (Bonjean curves, towing resistance, hydrostatics, damage stability, etc.) for various ships.
• Designed of secondary steel structures (foundations, sea-fastenings, etc.) for “Chirag-1“ platform modules, Derrick barge “Azerbaijan”, and for other barges.
Production Enterprise “Meshel”, Azerbaijan
1992 to May 1996,
Sales Manager
• Supervised of Marketing Group and Legal Department, marketing and advertising of manufacturing tools.
State Oil Company of Azerbaijan Republic (SOCAR),
Scientific Research Project Institute “GIPROMORNEFT”,
Laboratory of pile foundations for offshore fixed platforms
From 1986 to 1989
Research Engineer.
• Took part in design and testing of plugs and packers for offshore platform piling.
• Collected scientific-technical information on pile driving engineering, calculated the pile foundation for offshore platform, assisted in OTP “Oil Rocks” piling static tests, compilation and analysis of findings.
• Analysed existing fenders and prepared a recommendation for their design for offshore units.
• Took part in design and established procedures for underwater cutting by explosives, designed and carrying out a series of experimental tests for cutting the platform legs and for environmental protection during those operations.
SOCAR, Offshore Exploration Drilling Company from Drilling Rig
Semisubmersible Drilling Rig “Caspmorneft” (“Dede Gorgud”)
From 1979 to 1986
Barge Engineer
• Organised of marine operations (mooring, anchoring, transportation, etc.) on the Rig,
• Supervised Ballast operator’s job, sailors and riggers group on Rig (15 pers.), controlled the distribution of loads on the Rig.
• Took part in repairing of existed Drilling Rigs and in commissioning of new ones during construction phase.
• Designed and got State approval for procedures of stability control for Semisubmersible rigs.
|
Work Experience |
| Design and construction of FPSO, Offshore Mobile Units and Fixed Platforms, Engineering supervision (NA) and Interface Engineering, Stability and Positioning calculations, Weight Control, Displacement and Inclination tests, Hull Dimension Control, Consulting, working with different Classification Societies, familiar with international standards and codes. Have experience with senior and single-point responsibility jobs, R&D, offshore operations of Drilling Rigs, survey of ships, and worked with multinational and multi-religion companies. |
Comments/ Hobbies/ Interests etc: |
Professional Achievements
• Three patents & eight scientific publications.
Other Activity
• Vice Chairman of Joint Brunch of RINA & IMAREST Singapore, 2004
Outside Interests
• Scuba diving, skiing, book reading, restoration of old mechanisms.
Personality
• Good analytical skills, persistent, scrupulous, like to learn and want to continue professional development.
Language skills:
fluent in spoken and written English, Russian and Azeri, can communicate on Ukrainian, Turkish.
|
| | |
| | |
| | |
Last Updated on 27-Jan-12
-- End of CV/Resume --
Full CV/Resume available to paid companies/recruiters as an attachment
|